Foreword to the Third Edition 第3版前言
Foreword to the Second Edition第2版前言
Foreword to the First Edition第1版前言
Introduction绪论1
Chapter 1Basic Knowledge of Drawings第1章制图基本知识4
11Drawing Tools and Their Utilization绘图工具及其用法4
12Related Provisions in National Standards国家标准有关规定7
13Geometric Construction几何作图17
Chapter 2Basic Knowledge of Orthogonal Projection第2章正投影基础知识23
21Principles of Orthogonal Projection Method正投影法原理23
22Projections of Points on a Solid立体上点的投影27
23Projections of Lines on a Solid立体上直线的投影29
24Projections of Planes on a Solid立体上平面的投影31
Chapter 3Solids and Their Intersections第3章立体及其交线34
31Projections of Polyhedral Solids平面立体的投影34
32Projections of Curved Solids曲面立体的投影38
33Intersection of Planes and Solids平面与立体相交41
34Intersection of Two Solids两立体相交49
Chapter 4Composite Solids第4章组合体58
41Analysis for Composite Solids组合体的形体分析58
42Drawing Views of Composite Solids组合体三视图绘制60
43Reading Views of Composite Solids组合体三视图的读图63
44Dimensioning Composite Solids组合体的尺寸标注70
Chapter 5Axonometric Projections第5章轴测图76
51Basic Knowledge of Axonometric Projections轴测图基本知识76
52Isometric Projections正等轴测图77
53Cabinet Axonometry Projections斜二轴测图83
Chapter 6General Principles of Representation第6章图样画法85
61Views视图85
62Sectional Views剖视图90
63Cuts断面图103
64Drawings of Partial Enlargement局部放大图107
65Simplified and Specified Representation简化画法与规定画法108
Chapter 7Expression for Commonly Used Machinery Components第7章常用机件的表达113
71Screw Threads螺纹 113
72Screw Fasteners螺纹紧固件 122
73Gears齿轮129
74Pins销138
75Keys键139
76Springs弹簧142
77Bearings轴承146
Chapter 8Detail Drawings第8章零件图151
81Contents of Detail Drawings零件图的内容151
82Choosing Views of Detail Drawings零件图的视图选择152
83Representation Methods of Typical Parts典型零件的表达方法152
84Manufacturing Processes of Parts零件的结构工艺性158
85Dimensioning of Detail Drawings零件图的尺寸标注162
86Technical Requirements in Detail Drawings 零件图的技术要求165
87Interpreting Detail Drawings读零件图186
88Mapping Parts零件的测绘197
Chapter 9Assembly Drawings第9章装配图204
91Summary of Assembly Drawings装配图概述204
92Representation Methods of Assembly Drawings装配图的表达方法209
93Choosing Views of Assembly Drawings装配图的视图选择212
94Dimensioning and Specifications for Assembly Drawings装配图的标注214
95Rationality of Fitting Structures装配结构的合理性217
96Mapping Units and Representation of Assembly Drawings部件测绘及其装配图的画法220
97Interpreting Assembly Drawings and Extracting Detail Drawings读装配图和拆画零件图229
Chapter 10Other Drawings第10章其他工程图238
101Development展开图238
102Welding Drawings焊接图245
103Chemical Drawings化工制图253
104Electric Diagrams电气制图273
Appendices附录286
Appendix 1Screw Threads附录1螺纹286
Appendix 2Commonly Used Standard Parts附录2常用标准件289
Appendix 3Commonly Used Elements of Parts附录3常用的零件结构要素305
Appendix 4Surface Texture Parameter附录4表面结构参数309
Appendix 5Limits and Fits附录5极限与配合309
Appendix 6Commonly Used Materials附录6常用材料318
Appendix 7Definitions for General Heat Treatment and Surface Treatment
附录7常用的热处理和表面处理名词解释325
Appendix 8Commonly Used Terminologies and Abbreviations in Engineering Drawing
附录8工程制图中常用的专业术语及缩略语327
References参考文献332
內容試閱：
Foreword to the Third Edition
Since the first edition of the book was published in 2005, it has become a piece of unique academic work in the field with its innovative contents, wide practical use, and featured bilingual education. It received great support and was widely accepted by readers. The book was awarded the First Prize of Excellent Textbook of Shenzhen University. In 2008, it was selected as one of China’s National “Eleventh FiveYearPlan” Textbooks for Regular Higher Education. As a supporting teaching material, the bilingual electronic teaching plan published together with the book has also been very popular among readers and awarded several national and provincial prizes of Excellent Multimedia CAI Software for Higher Education.
This book has been revised in its third edition according to the newly formulated and improved national standards, as well as feedbacks and suggestions from readers. The basic structure of this book remains unchanged except the removal of Chapter 11 on “Computer Graphics”. The contents of the book have been revised or extended following the new national standards. Two dimensional bar code resources, such as detailed answers of exercises and animations of 3D models have been added along with difficult contents in this book, which can help teachers explain exercises and answer questions from students.
Primary participants who have contributed to the editing and revision of the third edition are Rong Cheng and Xue Fan.
This book is appointed as the preferred reference book by UOOC alliance. Support from Shenzhen University through the Teaching Material Development Grant is gratefully acknowledged. Comments, criticisms and submissions from readers are always welcome.
Authors
第3版前言
本书是一本内容新颖、实用性强、富有特色的双语教材，自2005年首次出版以来，深受广大读者的欢迎和厚爱，并荣获深圳大学优秀教材一等奖，2008年被评为普通高等教育“十一五”国家级规划教材。与本书配套的双语电子教案也极受欢迎，曾多次获得全国及广东省高等教育优秀多媒体教学软件奖。
为了全面贯彻国家颁布的最新标准，同时考虑到读者的反馈意见和建议，本书在第2版的基础上进行了修订。修订时删除了第2版中“第11章 计算机绘图”，其余维持原章节不变；按照现行国家标准更新修改或补充了相关的内容，并且在疑难章节部分配备了相应的二维码资源，包括详细题解和相应的立体模型动画演示等，可方便教师讲解习题或辅导学生。
参加本书再版编写和修订的人员有程蓉、范雪。
本书为UOOC联盟指定参考书。本书在编写和修订过程中得到深圳大学教材建设基金资助，在此表示诚挚的谢意，并衷心希望广大读者继续对本书提出宝贵意见。
编者
Foreword to the Second Edition
Since the first edition of the book was published in 2005, it has become a piece of unique academic work in the field with its innovative contents, wide practical use, and featured bilingual education. It received great support and was widely accepted by readers. The book was awarded the First Prize of Excellent Textbook of Shenzhen University. In 2008, it was selected as one of China’s National “Eleventh FiveYearPlan” Textbooks for Regular Higher Education. As a supporting teaching material, the bilingual electronic teaching plan published together with the book has also been very popular among readers and awarded several national and provincial prizes of Excellent Multimedia CAI Software for Higher Education.
This book has been revised in its second edition according to the newly formulated and improved national standards, as well as feedbacks and suggestions from readers. The basic structure of the book remains unchanged except that a new chapter on “Other Drawings” was added as the Chapter 10. The contents of the book have been revised or extended following the new national standards. Further typical examples used by home and abroad universities on part drawings and assembly drawings and their representation methods have been illustrated in the book. The Chapter 11 on “Computer Graphics”, which was the 10th chapter in the first edition, has been rewritten, in which AutoCAD2008 is used as the demo software.
For the sake of comparative reading, the
購物車/收銀台(
0
) | 在線留言板
| 付款方式
| 運費計算
| 聯絡我們
| 幫助中心 |
加入書簽
HOME
新書上架
