表面工程
中国表面工程的发展
National Technology Strategy and Surface Engineering in China
纳米表面工程
Nano Surface Engineering in the 21st Century
Development of Surface Engineering in China
苒制造工程设计及质量控制
Characterisation of Stress Concentration of Ferromagnetic Materials by Metal Magnetic Memory Testing
Metal Magnetic Memory Effect Caused by Static Tension Load in a Casehardened Steel
Investigation of Rolling Contact Fatigue Lives of Fe—Cr Alloy Coatings under Different Loading Conditions
Determination of Hardness of Plasma—sprayed FeCrBSi Coating on Steel Substrate by Nanoindentation
加载条件下铁磁材料疲劳裂纹扩展自发射磁信号行为研究
再制造的热喷涂合金涂层的结构完整性与服役寿命预测研究
发动机旧连杆缺陷超声检测研究
Health Condition Monitoring with Multiple Physical Signals in Tensile Test for Double—material Friction Welding
Effect of Residual Stress on the Nanoindentation Response of （100） Copper Single Crystal
Research on Tribological Behaviors of Composite ZnZnS Coating under Dry Condition
Investigation of Acoustic Emission Source of Fe—based Sprayed Coating under Rolling Contact
Investigation of a Novel Rolling Contact FatigueWear Competitive Life Test Machine Faced to Surface Coating
纳米压痕法测量等离子喷涂铁基涂层表面的残余应力
中国特色的再制造零件质量保证技术体系现状及展望
再制造关键技术
The Remanufacturing Engineering and Automatic Surface Engineering Technology
Erosion Properties of Fe Based AmorphousNanocrystalline Coatings Prepared by Wire Arc Spraying Process
Finite Element Modeling of Coating Formation and Transient Heat Transfer in the Electric Arc Spray Process
Tribological Behaviors of Surface—coated Serpentine Ultrafine Powders as
Lubricant Additive
再制造工程的现状与前沿
Elastoplastic Analysis of Process Induced Residual Stresses in Thermally Sprayed Coatings
自动化电弧喷涂路径对涂层残余应力的影响
Cu Nanoparticles Effect on the Tribological Properties of Hydrosilicate Powders as Lubricant Additive for Steel—steel Contacts
Effect of Surface Nanocrystallization on the Tribological Properties of 1 Cr1SNi9Ti Stainless Steel
Zn—Al涂层腐蚀电化学行为研究
绿色再制造工程的发展现状和未来展望
再制造成型技术发展及展望
凹凸棒石黏土润滑油添加剂对钢钢摩擦副摩擦学性能的影响
高速电弧喷涂FeAlNbB非晶纳米晶涂层的组织与性能
Research on the Microstructure and Space Tribology Properties of Electricbrush Plated NiMoS2 —C Composite Coating
Effect of Heat Treatment on Microwave Absorption Properties of Ni—Zn—Mg—La Ferrite Nanoparticles
高速电弧喷涂NiCrBMoFeBaF2·CaF2涂层的摩擦磨损性能研究
电流密度对自动化电刷镀Ni镀层组织结构和性能的影响
Fe314合金熔覆层残余应力激光冲击消除机理
高速电弧喷涂再制造曲轴FeAlCr3Crl3复合涂层的性能研究
再制造工程管理
着眼实践寻蹊径，联想创新攀高峰
装备再制造工程学科的建设和发展
大力发展再制造产业
发展装备再制造，提升军用装备保障力和战斗力
再制造工程的发展及推进产业化中的前沿问题
A Research on the Concepts and Estimate Methods of Remanufacturing Rate of Engine
再制造综合评价指标体系的设计研究
再制造认证认可发展策略思考
废旧产品再制造性评估指标
再制造产业发展过程中的管理问题
建设工程研究中心，提升再制造产业技术水平
附录
附录1 获奖情况
附录2 出版的学术著作
附录3 制定的国家标准
附录4 获得授权的国家发明专利（部分）
購物車/收銀台(0) | 在線留言板
| 付款方式
| 運費計算
| 聯絡我們
| 幫助中心 |
加入書簽
HOME
新書上架
![地理计算与R语言 [英] 罗宾·洛夫莱斯 [德]雅纳·蒙乔 [波兰] 雅库布·诺沃萨德](http://103.6.6.66/upload/mall/productImages/24/43/9787111759478.jpg)
